PRODUCTS BY CATEGORY

 ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9 |  ALL


Total number of products in the directory (5562)
  •  3” thick Formed Stainless Steel Plate

    3” thick Formed Stainless Steel Plate

    G. E. MATHIS Company formed this 3” thick plate in a 1000 ton press brake.  Our press brakes are capable of forming sections 40 ft in length.

  • #00349 Commercial Zinc

    #00349 Commercial Zinc

    4 Tab Oval weld-on commercial zinc. Let us quote you on your usage. 954-874-6309 or psmith@tecnoseal-usa.com

  • #2 Marine Grease

    #2 Marine Grease

    No. 2 Marine Grease is manufactured specifically to meet the demanding needs of the marine industry.

  • .50” thick x 25 ft Long Formed Carbon Steel Included Angle

    .50” thick x 25 ft Long Formed Carbon Steel Included Angle

    G. E. MATHIS Company developed, sheared and press brake formed this close tolerance 25 ft long included angle.  Our press brakes can for sections up to 40 ft in length.

  • “End-Caps” Padding Pole Tops

    “End-Caps” Padding Pole Tops

    Dr. Shrink, Inc. has developed the new and inexpensive “End-Caps” to solve the old shrink wrapping problem of wooden uprights either falling down or poking through shrink wrap covers during off-season storage.

  • ”Around the Leg” Cranes (CAL series)

    ”Around the Leg” Cranes (CAL series)

    Liebherr Cranes are the highest quality, safest cranes available on the market & represent the successful integration of multi-disciplined technologies by a team of over 120 engineers. Liebherr cranes cannot be overloaded and the self diagnostic, remote accessible control system virtually insures...

  • 1” thick x 17 ft long Formed Channel

    1” thick x 17 ft long Formed Channel

    G. E. MATHIS Company programs, laser cuts and forms a wide range of cross sections in a variety of material types and thicknesses on our equipment.  Long, close tolerance work is our specialty.

  • 10 ft Diameter Structural Weldment

    10 ft Diameter Structural Weldment

    10 ft Diameter Carbon Steel Components and Weldment:  G. E. MATHIS Company programmed, laser cut, assembled and welder this close tolerance section for chemical processing industry.  Our Lasers can cut components 13 ft wide x 90 ft long.

  • 100°C Type P/LSZH Type X/E, VFD Cable

    100°C Type P/LSZH Type X/E, VFD Cable

    ENERFLEX® Type P Cable – IEEE45 P1580 UL1309/CSA 22.2 no. 245 +Cable sizes from MV cable to instrumentation.

  • 1000 Impact

    1000 Impact

    10 Meter Rigid Hull Inflatable Boat built for workboat, patrol, rescue, or combat missions. Hundreds of available options let you customize the boat just the way you need it.

(Viewing Page 1 of 557)
 
 
Diversified Business Communications